SPECIFICATIONS

Applicable Dog Breed: Universal
Applicable object: general purpose
Brand Name: NONE
Dropshipping: Support
High-concerned chemical: None
Material: ABS
Origin: Mainland China
Product Category: tooth scrubber
material: ABS + 316 stainless steel

Product information:
5 large gears with multiple cleaning modes
Purple light tip poison
Ring condenser LE0 shadowless lamp
waterproof
Automatic shutdown in 10 minutes
installation test
1. According to the style of the machine you purchased, if it is a plug-in model, press and hold it for 3 seconds to turn it on after plugging it in; if it is a charging model, charge the machine (the charging time varies from 1-2 hours according to the power of your own charger). The charging model cannot be turned on during charging. Disconnect the power cord to turn it on and use.
2. Install a pointed tip on the machine, generally use a flat head first (the contact surface is wider for easy cleaning), and use a matching small metal wrench to tighten the pointed tip (the method of screwing is the same as screwing).
3. Please press and hold the power button for 2-3 seconds when turning it on, and the power indicator light is on. At this time, the machine will not have any vibration or sound. (Special Tips: Remember not to touch your hands, nails, etc. with the tip of the machine.) Correct test method: Use the tip of the machine to touch the matching small metal wrench. When the metal wrench has an obvious sense of vibration, you can hear a sharp squeaking sound, and the tip cannot see any vibration. At this time, it means that the machine has been working normally and can start operating normally.
4. The machine has a 10-minute protective shutdown setting, and it will automatically shut down in 10 minutes, just turn it on again.
Operation method
1. How to use the tip: Start from the flat head G2 (the one with the widest head), the contact surface is wider, and the cleaning force is large. If the flat head cannot be cleaned, use the tip G1 or the thin tip P1 instead.
2. Cleaning tips:
(1) The tip must be tightened in place. If there is no resonance or the resonance force is small, please tighten it on the existing foundation, because the tip is not tightened enough, and the power cannot be transmitted or reached the maximum.
(2) When operating, if the pressing force is slightly larger, the resonance force will be relatively large, but please do not press until the tip cannot vibrate, subject to the squeaking vibration sound;
(3) Keep your teeth wet during use and keep them moist for better cleaning effect
(4) Stay in each place for 5-15 seconds during use until the powder is shaken out, and then slowly move back and forth to allow the tip to work in different areas until the tartar is cleaned into powder and dropped.
3. Cleaning effect: The machine mainly shakes tartar into powder, and slowly achieves the overall cleaning effect by shaking it down a little bit. For the tartar into pieces, after slowly loosening the edge and shaking it small, it may also fall off the whole piece. The main operation is to shake it into powder, so you need to be patient.